Compared with traditional road maintenance and reconstruction methods, the road in-situ Road cold recycler process has many advantages that are incomparable.

1.Low cost

According to the introduction of foreign construction materials, compared with the method of laying new material on the old paving layer, cold-in-place recycling can reduce costs by about 20% to 46%.

2. Raise the level of the old road

 The road grade can be fundamentally improved through the improvement of the carrying capacity of the grassroots level, which is of special significance for low-grade highways.

3. Structural integrity 

In the uniform and thick pavement produced by the grate Road cold recycler machine construction, there is no weak interface between the thinner plies that sometimes occurs in traditional construction methods.

4.Do not damage the roadbed

Because the construction of the Road cold recycler machine is a one-time operation, the recycling unit only passes once on the exposed subgrade. Therefore, compared with traditional construction methods, the damage to the roadbed is small.

5.Save material

All the old lay-up materials are used in situ, thereby greatly reducing the amount of new materials and protecting resources.

6. Short construction period

Because there is no transportation problem of the old materials, no other machinery is required to loosen and crush the old materials, and there is no need to remove and specifically crush the large pieces of material. More importantly, the one-time operation characteristics of the construction process greatly simplify the construction process. This saves construction time.

7.Protect the environment

Cement pavement is broken because the use of old materials has greatly reduced the amount of new material mining, and there is no problem in the transportation and storage of old materials. Fundamentally meets the requirements of environmental protection.