Road cold recycler Construction of Yongcheng Section of G311
In late September 2012, the overhaul and widening project of Yongcheng section of G311 National Road began to enter the Road cold recycler construction phase. To speed up the progress, the construction party has transferred two WR 2300L Road cold recycler machines produced by our company to the site for construction. The strength of G311 national roadbed is high. The construction of such a road section reflects the performance advantages of our company's WR 2300L cold recycler. The construction speed is fast and the mixture is uniform and non-segregated. Drilling the cold recycled roadbed sample core can achieve completeness. The quality of the core is completely satisfactory. During the construction process, the construction party learned about the performance advantages of our cold recycler, and then adjusted a WR2400 cold recycler, which is dedicated to lime soil mixing. After the machine entered the site for construction, the construction party lamented that it would be better if it was cold-recycled early, and now it can be oiled. It turned out that the construction party used a road mixer to speed up the lime soil mixing of the road section. The construction progress was slow. At most, ten road mixers were being constructed at the same time. By September, there were still five on the construction site. Compared with this WR2400 Road cold recycler, 5 roads cannot keep up with the construction speed of a cold regeneration, and the overall fuel consumption is much higher.本文链接:
http://www.remaasia.com/news/117.html
